The Chain of Responsibility is an initiative in the transport industry, under which health and safety in transport is the responsibility not just of the driver, but of everyone who is involved in the supply chain.

This program examines the important role everyone involved in the completion of a transport task has in making sure safety guidelines are adhered to.

Topics included in the program:

• Schedulers
• Consignors and Consignees
• Loaders and Unloaders
• Drivers

When everyone in the chain is working together to manage risks, and recognises that responsibility for the safe completion of a transport task lies with all of them, safety is greatly improved, and everyone’s job becomes easier.

RUNNING TIME: 7 Minutes

Every time we get in our cars we’re potentially putting our lives at risk. Being aware of the car we drive and understanding our car’s safety technology and how it works can greatly improve our driving safety.

This program is designed to make us more aware of the cars we drive, and in so doing, make us more conscious of what we’re doing when we’re behind the wheel.

This program looks at:

Sitting in the car correctly:

• Correct positioning of legs
• Mirror settings

Steering:

• Correct hand position
• Steering method

Airbags

• How they work in an accident
• Precautions to avoid airbag associated injuries

ABS

• What it is?
• How does it work?
• What are its advantages?

Stopping Distances

• Safe travelling distance
• 2 second gap

Being an aware driver is fundamental to being a safe driver. It is the responsibility of every driver to know their car and to be aware of the way they drive. Increasing our awareness as drivers means that every time we’re in the car we’re putting safety first.

RUNNING TIME: 12 minutes

Road safety is a major public safety issue. A large proportion of road travel is work-related, and research shows that work vehicles are involved in accidents at a higher rate than private vehicles.

This program examines the important role played by all members of an organisation in avoiding accidents, including observing warning signs and maintaining strict adherence to company policy.

Topics included in the program:

• The Role of the Organisation
• The Role of the Individual
• General Guidelines for Safe Driving
• Emergency Situations
• Safe Driving Policy

Work-related driving presents some significant safety challenges. But, with due care and attention accidents and injuries can and will be reduced.

RUNNING TIME: 7 Minutes

Elevating Work Platforms are also referred to as EWPs or Mobile Elevating Work Platforms (MEWPs). The use of EWPs has been a major factor in the reduction of falls accidents in the workplace, and in many cases, the use of an EWP is the safest solution to enabling temporary work at height. 

However, the use of EWPs is not risk free.  There are many potential hazards associated with the use of EWPs.

This comprehensive EWP safety program covers:

• Types of EWPs
• Pre-Operational Checks
• General Guidelines
• Hazards, including
  Tipping
  Collapses
  Trapping and Crushing
  Falls
  Electrical Hazards
  Object Falling from Height
• Control Measures

The objective of this program is to highlight the importance of operating EWPs safely and by so doing, increase awareness of the standards for worker responsibility in observing and being active in daily safety procedures.

DURATION: 16 Minutes

The use of Elevating Work Platforms (EWPs), also referred to as Mobile Elevating Work Platforms (MEWPs) has been a major factor in the reduction of falls and accidents in the workplace. This safety short gives you a quick overview of the general guidelines when operating an EWP.

RUNNING TIME: 2 Minutes

The use of Elevating Work Platforms (EWPs), also referred to as Mobile Elevating Work Platforms (MEWPs) has been a major factor in the reduction of falls and accidents in the workplace. This safety short gives you a quick overview of checks that should be performed before operating an EWP.

RUNNING TIME: 3 Minutes

It should be the priority of every organisation, and every individual within an organisation, to protect the health and safety of their colleagues and the public, and to ensure their workplace minimises environmental damage, in all its forms.

This program examines how organisations can be aware of their impact on the environment and methods that can be implemented to reduce environmental damage.

Topics included in the program:

• Climate Change
• Emissions
• Waste management
• Pollution

Knowing the ways in which your workplace can affect the environment, and staying aware of the ways you can prevent environmental damage from your work, is the first step to creating a more eco-friendly workplace.

RUNNING TIME: 11 Minutes

Forklifts – sometimes called Lift Trucks – are a common sight in many workplaces, and often make the lifting and transporting of goods and materials much easier and safer.

But without good safety practices and procedures in place forklifts can be very dangerous.  In fact, forklifts are a leading cause of workplace deaths and injuries.

A loaded forklift can weigh many tonnes, and do a lot of damage in the event of an accident.  In addition, they are frequently less stable than many other vehicles. 

This comprehensive forklift safety program covers:

• The main causes of Forklift Accidents
• Pre-Operational Checks
• Operational Checks
• Getting on and off
• Load Handling
• Picking up a load
• Setting down a load
• Fault discovery
• Speed and Stopping Distances
• Traffic Management and Pedestrian Traffic 

The objective of this program is to highlight the importance of operating Forklifts safely and by so doing, increase awareness of the standards for worker responsibility in observing and being active in daily safety procedures.

DURATION: 18 Minutes

A loaded forklift can weigh many tonnes, and do a lot of damage in the event of an accident.  In addition, they are frequently less stable than many other vehicles. This safety short gives you a quick overview of checks that should be performed before operating a forklift.

RUNNING TIME: 1 Minute

• Pre-use Checks
• Care of Equipment whilst in use
• Planned Periodic Inspections
• Storage of Equipment

The program looks at all the general do's and don'ts when using slings and highlights the importance of the pre-use checks and what all operators should look for when selecting the appropriate sling for a given task.

RUNNING TIME: 17 Minutes

Accidents resulting from inadequate equipment and machine guarding cause some of the most traumatic injuries in the workplace today.   

This program covers the following:

• Why guards are used
• The risks associated with mechanical hazards
• The requirements for effective machine guarding
• The different types of guards and their functions
• Safe work practices when working with equipment and machinery.

Advances in technology, safety standards and risk management have all contributed to increasingly effective guards being used in the workplace today, but despite all these advances, horrific accidents still occur. 

When guards are not in place or when guards are not used correctly, people can be pulled into machines, have limbs amputated and body parts crushed. 

It is therefore critical that we are aware of and understand the elements covered in this program. This will help all workplace personnel to avoid accidents and injuries when working with equipment and machinery.

RUNNING TIME: 15 Minutes

• Lack of adequate inspections and checks
• Overloading the crane beyond recommended capacities and 
• Lack of knowledge of critical information by the operator 

Work on trenches and excavations carries numerous hazards and can pose a serious threat of injury and even death, if the risks are not properly assessed and guarded against.

The hazards of trenching and excavation can affect workers both above and below ground. These hazards include:

• Collapses that can crush or trap people within the excavation.
• Falls of equipment or soil into the excavation.
• Flooding.
• Slips, trips, and falls, including falls into the trench.
• Contact with buried service lines.
• Contact with overhead powerlines.
• Hazards from gas, dust, or lack of oxygen

RUNNING TIME: 12 Minutes

There are a variety of control measures that can be put into place to address the hazards of excavation and trenching.

There are three ways of controlling the risk of ground collapse:

• Trench shields,
• benching or battering,
• and ground support.

After an excavation has been dug, nobody should enter until an appropriate ground support system is in place.

RUNNING TIME: 4 Minutes

Identifying hazards is the first step before control measures can be implemented.

It’s necessary to identify the presence of any essential services at the site of the excavation.

This means any underground services such as

• gas,
• water,
• sewerage,
• or electricity lines.
• It also means overhead powerlines.

RUNNING TIME: 4 Minutes